Mô tả

Datacenter Core Trung tâm dữ liệu cốt lõi & Cơ sở quan trọng
Xây dựng các trung tâm dữ liệu cốt lõi linh hoạt, có khả năng mở rộng và hiệu quả với các giải pháp toàn cầu của Vertiv

Vertiv SmartMod

For small room IT deployments up to 10 racks and 100kW or less, SmartMod offers a simple way to install capacity in a fraction of the time a typical IT build might take. With integrated, pre-engineered, and pre-fabricated infrastructure, you can rapidly achieve your objectives.

And you don’t have to blow the budget, or overbuild based on uncertain future needs – with rightsized systems designed to work together and optimized for constructability and speed to startup, you can build just what you need today and expand as needed in the future. SmartMod leverages core Vertiv Critical Power, Thermal

Management, and Monitoring & Control technologies, including modular and scalable Vertiv Liebert EXM UPS power protection, close-coupled in-row Liebert CRV thermal management units, flexible Vertiv VR racks, Vertiv rack PDUs, thermal containment to isolate hot aisle and cold aisle airflows, and more.
Find out more about the Vertiv SmartMod here.

Vertiv Power Module 1000/1200 Datacenter Core

Power Module 1000/1200 enables you to deploy isolated, powerdense, critical infrastructure capacity just in time to meet your business demands. You can rapidly construct redundant blocks of 1000 or 1200 kVA/kW critical power infrastructure for your new or existing facility, allowing you to focus on the sensitive areas of the facility that require the most management. And, it can be used in a site architecture that is hot scalable, so you can add capacity by simply adding additional units, without taking the critical loads offline.

Vertiv Power Module incorporates Liebert EXL S1 UPS offering industry-leading power density and proven reliability, multiple switchboard configurations offering distribution options for both critical and non-critical downstream loads, redundant Liebert thermal management units, and more. The entire Vertiv Power Module and its subsystems are designed to minimize additional work required at the
site – from arrival on-site to startup and commissioning in days instead of months

SmartMod

For small room IT deployments between 2-12 racks and 90kW or less, SmartMod offers a simple way to install capacity in a fraction of the time of a typical IT build. With integrated, pre-engineered, and pre-fabricated infrastructure, you can rapidly achieve your objectives. And you don’t have to blow the budget, or overbuild based on uncertain future needs – with right-sized systems designed to work together and optimized for constructability and speed to startup, you can build just what you need today and expand in the future.

SmartMod leverages core Vertiv Critical Power, Thermal Management, and Monitoring & Control technologies, including Liebert UPS power protection, in-row Liebert CRV thermal management units, Knürr racks, Vertiv rack PDUs, thermal containment, and more

SmartMod MAX

SmartMod MAX is a simple, configurable system that extends the capability of the SmartMod platform to larger deployments. For IT deployments up to 180kW and 26 IT racks, SmartMod MAX offers a simple way to install capacity. The modules are shipped in two prefabricated sections, then connected and sealed at your site by experienced Vertiv personnel to create a contiguous space, just like a traditional data center. Configured with two rows of racks, the system uses aisle containment to ensure optimal performance and efficiency of thermal management systems. All subsystems are factory installed into a secure, weatherproof and transportable enclosure – simplifying and shortening on site time required to install and startup, and reducing the potential for risk, quality, or schedule delays.

Power Module 400/600 Datacenter Core

With Vertiv Power Module 400/600, you can deploy the right amount of power to satisfy your needs today – in 120kVA or 200kVA increments – while allowing you to scale to the needs of tomorrow. Power Module 400/600 is both internally and externally hot scalable – you can add capacity with systems internally, or you can add additional Power Modules. This means a single unit can operate with N+1 or 2N redundancy, or you can incorporate Power Modules in an overall redundant site architecture.

PFM DATA CENTER FOR CORE SITE

PFM data centers deliver low risk, high value implementations with the added benefits of faster delivery and easier on-site assembly. Designing, configuring, and fabricating data center infrastructure off-site creates tighter integration across systems, streamlines processes and enhance management of those systems.

Prefabricated modular encompasses data centers and other critical facilities that are pre-engineered with systems assembled, integrated, and tested in a factory environment to shorten deployment time frame and improve the predictability of both schedule and cost performance. They are flexible, allowing for faster deployment and lower risk, scalable, allowing for rapid response to unforeseen demand, and efficient, allowing for lower total cost.

The data center can include such subsystems as thermal management, power protection and distribution, controls and management software, and services – plus ancillary systems such as lighting, fire protection, physical security,and water treatment – pre-configured to create a complete environment for the efficient and reliable operation of technology systems.

Other benefits include:

• Rapid Design – Leveraging repeatable subsystem building block designs enables simplicity, resulting in an efficient, automated, and low-risk design process.

• Tailored Integration – Highly complex mechanical & electrical integration activities are off-loaded to the factory where quality and velocity can be maintained.

• Simplistic Assembly – Concise and clear site documentation provides on-site teams with essential information needed to assemble modules effortlessly.

Hãy đặt nền móng cho sự hợp tác bằng cách gọi cho tôi

(Mr Hoàng) Hotline: 0374585868

Website: VOIMT.COM