Bộ lưu điện EXLS1 250KVA/250KW năm 2024

BỘ LƯU ĐIỆN
Bộ lưu điện EXLS1 250KVA/250KW năm 2024

Hover on the image to zoom

Bộ lưu điện EXLS1 250KVA/250KW năm 2024

Bộ lưu điện EXLS1 250KVA/250KW Hãng Vertiv Bảo hành: 12 tháng

Hotline: 0374585868

Website: VOIMT.COM

Add Wishlist Compare Email to a Friend Print

Add to Wishlist

Danh mục: BỘ LƯU ĐIỆN

Mô tả

Bộ lưu điện EXLS1 250KVA

Technical specifications bộ lưu điện EXLS1 250KVA
UPS Rating (kVA)	250KVA
Output Active Power at 104°F (40°C) (kW)	250KW
Input AC Parameters Input Voltage to Rectifier/ Bypass (VAC)	480, 3-phase, 3-wire
Permissible Input Voltage Range	+10%, -15%
Input Frequency (Hz)	60 ± 5Hz
Input Power Factor	≥ 0.99
Input Current Distortion (THDi) at Nominal Voltage at Full Load (%)	≤ 3.0
Power Walk-in (seconds)	1 to 90 (selectable in 1 second increments)
Battery & DC Parameters
Battery Type	Lithium ion, VRLA (Valve Regulated Lead Acid), VLA (Vented Lead Acid)
Nominal Battery Bus (VDC) / Battery Float Voltage (VDC)	480 / 540
DC Ripple at Float Voltage	< 1.0% (RMS value) < 3.4% Vpp
Temperature Compensated Battery Charging	Standard with Vertiv Battery Cabinets
Output Parameters
Load Power Factor Supported (Without Derating)	0.7 Leading to 0.4 Lagging
Output Voltage (VAC)	480, 3-phase, 3-wire
Output Voltage Regulation (%) / Output Voltage Regulation	< 1.0 (3-phase RMS average) / < 2.0 (3-phase RMS average) (50% Unbalanced Load) (%)
Output Frequency (Hz)	60 ± 0.1%
Output THD at Nominal Voltage (Linear Load) (%)	1.5 (RMS value)
Output THD at Nominal Voltage including a 100kVA Non Linear Load per IEC 6204-3 (%)	5.0 (RMS value)
Translent Recovery 100% Load Step / 50% Load Step / Loss of/ Return to AC Input Power	±4% / ±2% / ±2% (RMS average for one cycle)
Voltage Displacement (Balance Loads) / Voltage Displacement (50% Balance Loads)	120 deg ±1 deg / 120 deg ±2 deg
Overload at Nominal Voltage and 77°F (25°C)	110% continuously, 125% for 10 minutes, 150% for 60 seconds, 200% for 200 miliseconds
Physical Characteristics
Dimensions with Standard I/O Cabinet, W x D x H	51.3 in x 36.0 in x 79.1 in
Dimensions with BFD or Sharing Inductor I/O Cabinet, W x D X H	63.2 in x 36.0 in x 79.1 in
Weight with Standard I/O Cabinet, Unpackaged	1869 lbs
Weight with BFD or Sharing Inductor I/O Cabinet, Unpackaged	2269 lbs (max)
Color	Black, RAL 7021
Protection Class, UPS Enclosure	NEMA 1, IP 20 (with and without front door open)
Environmental
Operating Temperature	32°F to 104°F (0°C to 40°C)
Relative Humidity	0% to 95%, non-condensing
Operating Altitude	Up to 3300 ft (1000 m) without derating
Communications
Options	2 Liebert Intellislots
Card Compatibility	IS-UNITY-DP, IS-485EXI
Protocols Available	MODBUS-IP, MODBUS-485, BACNET-IP, BACNET-MSTP, SNMP, HTTP, LIFE Services
Standards
Transportation / Safety	ISTA Procedure 3B / UL 1778 5th Edition; CSA 22.2 NO 107.3
EMI / Surge	IEC 62040-2; FCC Part 15, Class A / ANSI C624.41, Category B3
Seismic	IBC 2015, CBC 2016, ASCE, OSHPD

Standard Features

– Redundant DC variable speed fans
– Advanced compact power core
– Transformer-free design
– Up to 99% efficient
– Unity/Symmetrical power factor
– 100kA short circuit withstand rating
– Advanced status-at-a-glance touchscreen control panel
– Lithium-ion battery compatible
– Parallel up to 8 units
– Top and bottom entry cable access
– Front and top only service access
– Intelligent paralleling mode
– Parallel UPS system control and monitoring from a single touchscreen control panel
– Vertiv LIFE Services Remote

Diagnostic and Preventive Monitoring
Optional Features
– Dynamic Online (VI) mode
– Single or dual input
– DC battery ground fault detection
– Distributed paralleling
– Seismic anchoring kit
– Load bus synchronization
– Backfeed disconnect
– Bypass current sharing inductors
– Emergency Power Off
– Unity communications card allowing dual simultaneous protocols
– FCC Part 15 compliance